<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7638.1">
<TITLE>RE: [bldg-sim] modifying TMY2 weather file in BIN format</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/plain format -->
<P><FONT SIZE=2>Venkata,<BR>
<BR>
(Sorry for cross-posting against the Radiance general discussion list)<BR>
<BR>
As DAYSIM weather files are based on Energy Plus weather files, you could just convert Energy Plus files directly into DOE-2/eQuest bin files using the eQ_WthProc executable from the DOE-2 web site:<BR>
<BR>
<A HREF="http://doe2.com/index_Wth.html">http://doe2.com/index_Wth.html</A><BR>
<BR>
Hope this helps,<BR>
<BR>
Denis Bourgeois, Ph.D.<BR>
Boursier post-doctoral CRSNG / NSERC Visiting Fellow<BR>
Institut de recherche en construction / Institute for Research in Construction<BR>
Conseil national de recherches Canada / National Research Council Canada<BR>
denis.bourgeois@nrc-cnrc.gc.ca<BR>
<BR>
<BR>
<BR>
-----Original Message-----<BR>
From: bldg-sim@gard.com on behalf of Ramana Koti<BR>
Sent: Sat 2006-05-27 01:58<BR>
To: bldg-sim@gard.com<BR>
Subject: [bldg-sim] modifying TMY2 weather file in BIN format<BR>
<BR>
Hello all,<BR>
<BR>
I need to modify the direct normal and total horizontal solar values in the<BR>
BIN format TMY2 weather file used by DOE-2/eQUEST to ensure both DAYSIM and<BR>
DOE-2 provide the same exterior horizontal illuminance. Any pointers on how<BR>
this can be done or an alternative approach will be appreciated.<BR>
<BR>
Regards,<BR>
Ramana.<BR>
<BR>
--<BR>
Venkata Ramana Koti<BR>
MS in Building Design (Energy/Climate)<BR>
School of Architecture and Landscape Architecture<BR>
College of Design<BR>
Arizona State University, Tempe AZ 85287<BR>
<BR>
<BR>
======================================================<BR>
You received this e-mail because you are subscribed<BR>
to the BLDG-SIM@GARD.COM mailing list. To unsubscribe<BR>
from this mailing list send a blank message to<BR>
BLDG-SIM-UNSUBSCRIBE@GARD.COM<BR>
<BR>
</FONT>
</P>
<PRE>
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM@GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@GARD.COM
</PRE></BODY>
</HTML>