Hello,<br>
<br>
I am doing some modeling with EQuest 3.55 and am trying to
understand two things: How to input an NFRC window U-value, and how the
DOE2.2 engine deals with window conductance.  <br>
<br>
For inputting an NFRC window U-value, the help file offers Table 2.5
under Glass Conductance to convert between "manufacturer's U-Value and
DOE-2 glass conductance."  However, the conversion is different
between summer and winter, and conductance is a single input, not a
seasonal one.  Is it really a matter of doing a weighted average
of the converted Summer and Winter U-values?  I am leaving the
emissivity at its default 0.84.<br>
<br>
Once the conductance is fed in (1), the resultant window U-value in the
LV-D report does not match the conductance. I assume that Table 2.5 is
intended to add the air film, and I am not modeling any frame
(2).  Does DOE2.2/EQuest assume a frame of some sort by default?<br>
<br>
Thank you for any insights,<br>
<br>
John Weale<br>
<br>
<br>
(1) "GLASS-0.470-0.563" = GLASS-TYPE      <br>
   TYPE             = SHADING-COEF<br>
   SHADING-COEF     = 0.5635<br>
   GLASS-CONDUCT    = 0.531<br>
<br>
(2) A typical window definition:<br>
"WINDOW3" = WINDOW          <br>
   GLASS-TYPE       = "GLASS-0.470-0.563"<br>
   SHADING-SCHEDULE = "DEFAULT-SHADE"<br>
   MULTIPLIER       = 1<br>
   HEIGHT           = 13.86<br>
   WIDTH            = 13.86<br>
   MAX-SOLAR-SCH    = "SHADE-CTRL"<br>
   ..<br>