<html>
<body>
<font size=3>To Bldg-Sim subscribers<br><br>
Good news and bad news....<br><br>
Bad news--we found a few bugs in Version 1.2.1 that you might want to
know about...<br><br>
- COMIS results were not correct in the V1.2.1.012 release.  This
has been corrected.<br><br>
- DOE-2 Translator: The conversion in the DOE-2 Translator for Specific
Heat is incorrect. The translated value is a factor of 1000 too small.
The conversion should be J/Kg-K = 4186.8 * Btu/Lb-F. This has been
corrected.<br><br>
- In the eio output, the section "Zone Internal Gains/Equipment
Information - Nominal" reports "Floor Area {m2}, # Occupants,
Area per Occupant {m2/person}". The value being reported for
"Area per Occupant" is the inverse {persons/m2}. This has been
corrected.<br><br>
- Several new error detections were added and other parts of the install
cleaned up.<br><br>
All addressed issues and known issues are available on the YahooGroups
support list for EnergyPlus and will be downloaded if you download the
new version.<br><br>
<br>
Good news--a new build (22) of EnergyPlus Version 1.2.1 which fixes
these<br>
issues is now available from the EnergyPlus web site.<br><br>
Steps to get the new build:<br><br>
1. Go to the EnergyPlus web site (
<a href="http://www.energyplus.gov/" eudora="autourl">
www.energyplus.gov</a> ) and click on<br>
Getting EnergyPlus.<br><br>
2. Complete the registration info (yes, you have to register
again...).<br><br>
3. Download the new version.  You may want to try the Windows
web<br>
install--it only will download the necessary new files, not
everything.<br><br>
Thanks for using EnergyPlus!<br><br>
The EnergyPlus Development Team<br>
</font><PRE>

======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM@GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE@GARD.COM
</PRE></body>

</html>