<html>
<body>
This question is regarding brick masonry facades for high-rise buildings
(more than 3 stories). I am looking for
"<u>plastic"</u> ties/masonry anchors for use in masonry
facades to reduce the heat loss usually seen through the steel
ties. The ties will bind a 4" thick brick veneer facade to a
6" thick CMU block backing. The assembly includes insulation
(3") and an air cavity (1") between the brick and block. I'd
appreciate if you could let me know of any manufacturers/suppliers of
plastic ties that you may be familiar with, even if they are based
outside the US. <br><br>
Thank you.<br><br>
Sincerely,<br>
Smita<br><br>
<x-sigsep><p></x-sigsep>
<font size=2 color="#808080"><b>Smita Chandra<br>
</b>Energy Analyst<br>
M. Arch., LEED accredited professional<br>
smita@swinter.com <br>
Phone Extension 295<br><br>
<b>Steven Winter Associates, Inc.<br>
</b>50, Washington St<br>
Norwalk, CT 06854<br>
(203) 857-0200 (Phone) <br>
(203) 852-0741 (Fax)<br>
<a href="http://www.swinter.com/" eudora="autourl">www.swinter.com</a>
<br>
</font><PRE>
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM@GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@GARD.COM
</PRE></body>
</html>