<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1400" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I am trying to model a standard packaged Air
Conditioner for my residence. I am interested in the typical air
conditions right after it exits the cooling coil. I am mainly interested
in how reduced the temperature should be below my set point temperature (I have
seen roughly 15-25 F below), my air flow rate per ton of cooling (I have seen
roughly 350-450 cfm/ton), and what the humidity ratio should be (right now I
have set it at 0.0094). Also, what is a typical Sensible Heating Ratio for
a residential air conditioner (right now I'm geting ~75%) and if anyone could
give me their estimation for the ton of cooling for a 2275 ft2 house in Atlanta
would be that would be great. Finally, o</FONT><FONT face=Arial
size=2>ther then ASHRAE Fundamentals, are there any other standard ratings for
the exiting air conditions and where could I find them.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks</FONT></DIV>
<DIV><FONT face=Arial size=2>Ian Doebber</FONT></DIV>
<DIV><FONT face=Arial size=2>Masters Student</FONT></DIV>
<DIV><FONT face=Arial size=2>Virginia Tech</FONT></DIV><PRE>
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM@GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@GARD.COM
</PRE></BODY></HTML>