<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=windows-1255">
<META content="MSHTML 6.00.2800.1106" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I am trying to simulate a Double Skin Building in
Energy Plus and I have the fllowing dilema:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>One can choose between Simple AIRFLOW and
COMIS.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>COMIS has the disadvantage that you have to
simulate the whole building and will not accept non-communicating air paths -
and besides cannot be used if you have a system simultaneously.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>My best solution would have been if I could use
with MIXING a MIXING RATE which depends on the temperature difference and can be
stopped if the temperature difference is less than, say, two degrees. This is
something that can be done with VENTILLATION but not with MIXING. Does any one
know a way around this difficulty ?</FONT></DIV>
<DIV><FONT face=Arial
size=2>
Thanks</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV><PRE>
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM@GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@GARD.COM
</PRE></BODY></HTML>