<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="MSHTML 6.00.2800.1276" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV id=idOWAReplyText94418 dir=ltr>
<DIV dir=ltr><FONT face=Arial color=#000000 size=2>Priya,</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial color=#000000 size=2>Download the DOE2.2(eQuest)
documentation from DOE2.com. There are six volumes (of .pdf) that explain
how DOE2.2 works. This will answer your questions on how to create the
components within eQuest to use the data you develop. As has already been
mentioned DOE 2.2 is good at determining loads/energy but not specific
conditions within a space. </FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2>You may think about doing several
models. Use DOE 2.2 to simulate monthly/annual energy use (calibrate with
utility bills) and a more advanced program to look at
the thermal mass charachteristics of the strawbale wall and the effects on
internal temp.</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2>Be careful using HOBO
temperature loggers, they are not well suited for measuring small
temperature differentials because of their accuracy. </FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2>regards,</FONT></DIV>
<DIV dir=ltr> </DIV></DIV>
<DIV id=idSignature92201 dir=ltr>
<DIV><FONT face=Arial color=#000000 size=2>Michael Tillou, PE</FONT></DIV>
<DIV><FONT face=Arial size=2>etc Group, Inc.</FONT></DIV>
<DIV><FONT face=Arial size=2>PO Box 749 </FONT></DIV>
<DIV><FONT face=Arial size=2>North Adams, MA 01247</FONT></DIV>
<DIV><FONT face=Arial size=2>413-664-9070</FONT></DIV>
<DIV> </DIV></DIV>
<DIV dir=ltr><BR>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> postman@gard.com on behalf of Priya
Premchandran<BR><B>Sent:</B> Fri 11/28/2003 12:34 PM<BR><B>To:</B>
BLDG-SIM@gard.com<BR><B>Subject:</B> [BLDG-SIM] energy simulation of strawbale
houses<BR></FONT><BR></DIV>
<DIV>
<DIV><FONT face=Arial size=2>
<DIV><FONT face=Arial size=2>Hello,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I am graduate student at the Penn State university.
My research is on the energy modeling of strawbale houses situated on the
Northern Plains of US. Briefly explaining my objectives of research, i would be
performing steady state and dynamic tests in labs to determine the R value of
the strawbale specimen. This value would be used in energy modeling software to
simulate the building performance of an already existing strawbale house. The
results of this dynamic simulation would be compared with the temperature data
that are being recorded using HOBO of the existing structure also used for
simulation. For the purpose of simulation, I am considering eQuest
but DOE 3.0 also seems to be appropriate.</FONT><FONT
face=Arial size=2></FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>My concerns, for which I wish to seek
suggestions, are how do I plug in the R value obtained from the lab
experiments into eQuest. Is it possible to do so with any softwares efficiently.
Also, I am not sure, how would I convert temperature data to be able to compare
them with the results of the simulation model. </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Any time taken out to put down their thoughts of
suggestions would be sincerely appreciated. <FONT face="Times New Roman"
size=3>It has been quite interesting to read the various questions, concerns and
comments that come online through this list serve!</FONT></FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Thankyou very much.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Priya</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial
size=2>-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------</FONT></DIV>
<DIV> </DIV><FONT face=Arial size=2>
<DIV><BR>P r i y a P r e m c h a n d r a n</DIV>
<DIV> </DIV>
<DIV>M S i n A r c h i t e c t u r a
l E n g i n e e r i n g<BR>( C o n s t r u c t i o n M a
n a g m e n t O p t i o n )<BR>D e p t . o f
A r c h i t e c t u r a l E n g i n e e r i n g <BR>1 0
4 E n g . U n i t A <BR>P e n n s y l v a n
i a S t a t e U n i v e r s i t y <BR>P A 1
6 8 0 2 </DIV>
<DIV> </DIV>
<DIV>c e l l : 8 1 4 8 8
0 8 7 3 2<BR>o f f i c e : 8 1 4 8 6
3 8 3 1 3</FONT></DIV></FONT></DIV><PRE>==================
You received this e-mail because you are subscribed
to the BLDG-SIM@GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@GARD.COM
</PRE></DIV><PRE>
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM@GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@GARD.COM
</PRE></BODY></HTML>