<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=windows-1252" http-equiv=Content-Type>
<META content="MSHTML 5.00.3516.2800" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I have a number of questions regarding what I was
looking for in my earlier email. I thought I should clarify why I am
asking for advice: <FONT face=Arial size=2>I actually need hourly reports
to verify the metered building electrical energy versus the amount of electrical
energy generated by building mounted photovoltaics. I need to determine
what percentage of the yield from the PV system is in excess of the total
building load at any point during the year. In my building, if the yield
is greater than the load, then corresponding amount of electricity in kWh will
be "net-metered" or reverse metered to the grid. Since we will be
developing an hour-by -hour model of the PV yield, I need a whole building
energy end use-report to match. The ultimate goal will be to predict the
amount of energy sold back to the utility. I know that I have total
operating hours and demand kW in other reports. In summary, that's why I
need an hour-by-hour report.</FONT></FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks again,</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Patrick J Dolan<BR>Prisco Serena Sturm
Architects<BR>3351 Commercial Ave.<BR>Northbrook, IL
60062<BR>847-564-0370, Ext 24<BR>847-205-5089, Fax<BR><A
href="mailto:pdolan@pssarchitects.com">pdolan@pssarchitects.com</A></FONT></DIV><PRE>
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM@GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@GARD.COM
</PRE></BODY></HTML>