<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META NAME="Generator" CONTENT="MS Exchange Server version 5.5.2653.12">
<TITLE>RE: [BLDG-SIM] Energy modeling of an ice ring</TITLE>
</HEAD>
<BODY>
<P><FONT SIZE=2>Hey, Jeff. I haven't tried it, but doesn't 2.1E TNG (The Next Generation) have a refrigeration component that might be expanded to an ice rink?</FONT></P>
<P><FONT SIZE=2>Also, eQuest Version 3.0 (DOE-2.2) claims to now have the direct ability to do ice rinks via the refrigeration system link.</FONT></P>
<P><FONT SIZE=2>-----Original Message-----</FONT>
<BR><FONT SIZE=2>From: Jeff Haberl [<A HREF="mailto:jhaberl@esl.tamu.edu">mailto:jhaberl@esl.tamu.edu</A>]</FONT>
<BR><FONT SIZE=2>Sent: Friday, March 28, 2003 3:24 PM</FONT>
<BR><FONT SIZE=2>To: BLDG-SIM@gard.com</FONT>
<BR><FONT SIZE=2>Subject: [BLDG-SIM] Energy modeling of an ice ring</FONT>
</P>
<BR>
<P><FONT SIZE=2>Hello:</FONT>
</P>
<P><FONT SIZE=2>One can force DOE-2 into thinking there's a "cold" zone sandwiched in</FONT>
<BR><FONT SIZE=2>between two</FONT>
<BR><FONT SIZE=2>zones, with a bit of tinkering with UA's to counteract minimum zone temps.</FONT>
</P>
<P><FONT SIZE=2>That's what we did in the following paper:</FONT>
</P>
<P><FONT SIZE=2>Haberl, J., Claridge, D. 1985. "Retrofit Energy Studies of a Recreation</FONT>
<BR><FONT SIZE=2>Center", ASHRAE Transactions-Research, Volume 91, Part 2, pp. 1421 - 1433,</FONT>
<BR><FONT SIZE=2>(June). </FONT>
</P>
<P><FONT SIZE=2>Hopefully, some better methods are now available elsewhere that model</FONT>
<BR><FONT SIZE=2>interior conditions, including radiation from the rink to surfaces inside</FONT>
<BR><FONT SIZE=2>the</FONT>
<BR><FONT SIZE=2>building...</FONT>
</P>
<P><FONT SIZE=2>Jeff</FONT>
</P>
<P><FONT SIZE=2>8=! 8=) :=) 8=) ;=) 8=) 8=( 8=) 8=() 8=) 8=| 8=) :=')</FONT>
<BR><FONT SIZE=2>8=) 8=) 8=?</FONT>
</P>
<P><FONT SIZE=2>Jeff S. Haberl, Ph.D., P.E.............................jhaberl@esl.tamu.edu</FONT>
<BR><FONT SIZE=2>Associate Professor....................................Office Ph:</FONT>
<BR><FONT SIZE=2>979-845-6507</FONT>
<BR><FONT SIZE=2>Department of Architecture...........................Lab Ph: 979-845-6065</FONT>
<BR><FONT SIZE=2>Energy Systems Laboratory...........................FAX: 979-862-2457</FONT>
<BR><FONT SIZE=2>Texas A&M University..................................77843-3581</FONT>
<BR><FONT SIZE=2>College Station, Texas, USA...........................URL: www-esl.tamu.edu</FONT>
</P>
<P><FONT SIZE=2>8=/ 8=) :=) 8=) ;=) 8=) 8=() 8=) :=) 8=) 8=! 8=) 8=?</FONT>
<BR><FONT SIZE=2>8=) 8=) 8=0 </FONT>
</P>
<BR>
<BR>
<P><FONT SIZE=2>-----Original Message-----</FONT>
<BR><FONT SIZE=2>From: postman@gard.com [<A HREF="mailto:postman@gard.com">mailto:postman@gard.com</A>]On Behalf Of Kateri Heon</FONT>
<BR><FONT SIZE=2>Sent: Friday, March 28, 2003 12:48 PM</FONT>
<BR><FONT SIZE=2>To: BLDG-SIM@gard.com</FONT>
<BR><FONT SIZE=2>Subject: [BLDG-SIM] Energy modeling of an ice ring</FONT>
</P>
<BR>
<BR>
<P><FONT SIZE=2>Hi,</FONT>
</P>
<P><FONT SIZE=2>I am interested too in modeling ice ring with DOE-2.</FONT>
<BR><FONT SIZE=2>Any information regarding ice ring modeling would be greatly appreciated.</FONT>
</P>
<P><FONT SIZE=2>Thanks</FONT>
<BR><FONT SIZE=2>Kateri</FONT>
</P>
<P><FONT SIZE=2>======================================================</FONT>
<BR><FONT SIZE=2>You received this e-mail because you are subscribed </FONT>
<BR><FONT SIZE=2>to the BLDG-SIM@GARD.COM mailing list. To unsubscribe </FONT>
<BR><FONT SIZE=2>from this mailing list send a blank message to </FONT>
<BR><FONT SIZE=2>BLDG-SIM-UNSUBSCRIBE@GARD.COM</FONT>
</P>
<P><FONT SIZE=2>======================================================</FONT>
<BR><FONT SIZE=2>You received this e-mail because you are subscribed </FONT>
<BR><FONT SIZE=2>to the BLDG-SIM@GARD.COM mailing list. To unsubscribe </FONT>
<BR><FONT SIZE=2>from this mailing list send a blank message to </FONT>
<BR><FONT SIZE=2>BLDG-SIM-UNSUBSCRIBE@GARD.COM</FONT>
</P>
</BODY>
</HTML>