<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii">
<META NAME="Generator" CONTENT="MS Exchange Server version 5.5.2654.45">
<TITLE>RE: [Bldg-sim] eQUEST simulation</TITLE>
</HEAD>
<BODY>
<P><FONT SIZE=2>I still run the original DOE-2.1E, but eQuest is DOE-2.2. So, as if to satisfy government bill collection computers by writing a check for $0.00, try modeling the building that has a fan with zero (or virtually zero) airflow and kW in the fan ?</FONT></P>
<P><FONT SIZE=2>-----Original Message-----</FONT>
<BR><FONT SIZE=2>From: Gllf22@aol.com [<A HREF="mailto:Gllf22@aol.com">mailto:Gllf22@aol.com</A>]</FONT>
<BR><FONT SIZE=2>Sent: Thursday, April 25, 2002 3:05 PM</FONT>
<BR><FONT SIZE=2>To: Bldg-sim@gard.com</FONT>
<BR><FONT SIZE=2>Subject: [Bldg-sim] eQUEST simulation</FONT>
</P>
<BR>
<P><FONT SIZE=2>I would like to use eQUEST to simulate buildings that do not have any HVAC </FONT>
<BR><FONT SIZE=2>equipment and that will be naturally ventilated. I am interested in getting </FONT>
<BR><FONT SIZE=2>hourly temperature of different locations within the buildings. I would like </FONT>
<BR><FONT SIZE=2>to get some advice and guidance on how to do this? Thanks in advance for any </FONT>
<BR><FONT SIZE=2>suggestions.</FONT>
</P>
<P><FONT SIZE=2>-Gladys Lopez</FONT>
</P>
<BR>
<BR>
<P><FONT SIZE=2>======================================================</FONT>
<BR><FONT SIZE=2>You received this e-mail because you are subscribed </FONT>
<BR><FONT SIZE=2>to the BLDG-SIM@GARD.COM mailing list. To unsubscribe </FONT>
<BR><FONT SIZE=2>from this mailing list send a blank message to </FONT>
<BR><FONT SIZE=2>BLDG-SIM-UNSUBSCRIBE@GARD.COM</FONT>
</P>
<PRE>
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM@GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@GARD.COM
</PRE></BODY>
</HTML>