[Bldg-sim] Colibri not iterating Honeybee_Export To OpenStudio

[Mostapha Sadeghipour Roudsari]

Hi Robert,

I assume this is the same as this question on the forum:
https://discourse.ladybug.tools/t/colibri-not-iterating-honeybee-export-to-openstudio/10631

I would suggest continuing the conversation there so as not to end up with
two parallel threads.

Regards,
--Mostapha


On Wed, Aug 12, 2020 at 11:04 AM Robert Cohen via Bldg-sim <
bldg-sim at lists.onebuilding.org> wrote:

> *Subject:* Colibri not iterating Honeybee_Export To OpenStudio
>
> We are currently working on iterating multiple models with variable shade
> depths using Colibri. Our goal is to measure the Energy and DA in each
> case. We found that the script works for all my daylight and radiation
> components, however, it does not record or run with the HB Openstudio
> components. The values are written as -999 on the CSV file. We are using
> the latest version of HB and OpenStudio 3.0.  Do you have insights and
> guidance on what needs to change to get this to work? Please see attached
> associated files.
>
> Thank you, Robert
>
>
>
> Robert Cohen, AIA NCARB LEED AP BD+C
> Robert* Cohen* *Architect* LLC
> 9 Bayberry Ridge
> Westport, CT 06880-1713
> TEL: 203-341-7781  FAX: 203-454-9588
> Email: R at RobertCohenArchitect.com
> http://www.RobertCohenArchitect.com <http://www.robertcohenarchitect.com>
>
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20200812/71c0161f/attachment-0002.html>