[Bldg-sim] Building modelisation uncertainties analysis

[Jim Dirkes]

I have not used it yet, but DesignBuilder (which uses EnergyPlus) has a new sensitivity analysis tool.
I think cove.tool may have such a feature, too.

James V Dirkes II, PE, BEMP, BCxP
Team Lead - Building Performance
616 450 8653
Foresight Management
https://fsmgmt.co/
LinkedIn <https://www.linkedin.com/in/jim-dirkes-4134447/>

Coffee Conversation:

We know that if we could totally comprehend God, then God would have to be no larger than our own minds, and so not large at all. We know that the very fact that there is a God requires that there should be elements we cannot reconcile; yet the moment we meet such elements, we are driven to wonder whether there can be a God after all.

________________________________
From: Bldg-sim <bldg-sim-bounces at lists.onebuilding.org> on behalf of Ibrahim NEYA via Bldg-sim <bldg-sim at lists.onebuilding.org>
Sent: Tuesday, September 3, 2019 11:46 AM
To: bldg-sim at lists.onebuilding.org <bldg-sim at lists.onebuilding.org>
Subject: [Bldg-sim] Building modelisation uncertainties analysis

Dear experts,

I am looking for tools (software, books, papers) and methods to perform
the analysis of uncertainties when simulating a building energy model with
advanced simulation engines as EnergyPlus.
Thanks in advance

Yours sincerely,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20190903/57153ca2/attachment-0002.html>