[Bldg-sim] Parking Garage Controls

[Saif A]

Thank you Nathan, the project I am on is a high-rise office building in Austin

> On Nov 15, 2018, at 3:39 PM, Nathan Miller <nathanm at rushingco.com> wrote:
> 
> Not sure what your project type is, but for multifamily residential applications, the Energy Star Multifamily High Rise Simulation Guidelines give some rules for garage exhaust modeling per 90.1 2016. See section 6.6.2 of this document:
> 
> https://www.energystar.gov/ia/partners/bldrs_lenders_raters/downloads/mfhr/ENERGY_STAR_MFHR_Simulation_Guidelines_AppG2016.pdf?700f-c417
>  
>  
>  
> Nathan Miller, PE, LEED AP BD+C – Mechanical Engineer/Senior Energy Analyst
> RUSHING | O 206-285-7100 | C 207-650-3942
> www.rushingco.com
>  
> From: Bldg-sim <bldg-sim-bounces at lists.onebuilding.org> On Behalf Of Saif A via Bldg-sim
> Sent: Thursday, November 15, 2018 4:22 PM
> To: bldg-sim at lists.onebuilding.org
> Subject: [Bldg-sim] Parking Garage Controls
>  
> Hi everyone.
>  
> I am trying to model parking garage controls required by ASHRAE 90.1 2010 Section 9.4.1.3. What would be the best approach to model these controls? Is there a published study that suggests a certain power reduction or schedules when using these controls?
>  
> Thank you,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20181115/bf9de115/attachment.html>