[Bldg-sim] Building calibration with EnergyPlus

[Jim Dirkes]

Ibrahim,
DesignBuilder and APIDAE offer optimization tools, but I am not sure if
they are geared for calibration.

On Tue, May 22, 2018 at 10:22 AM, Ibrahim NEYA via Bldg-sim <
bldg-sim at lists.onebuilding.org> wrote:

> Dear  Experts,
>
>
> I want to calibrate a building energy model using measured temperature
> data with EnergyPlus (Energy Plus Runtime Language).
> For this, I need to put the measured data in the software as input stream
> and calculate the Root Mean Square Error RMSE and the  coefficient of
> variation of RMSE, CV(RMSE).
>
> Could you help me to solve this problem?
>
> Thank you very much
>
> Kindly regards
>
>
> NEYA Ibrahim
> Ingénieur en Génie Electrique et Énergétique
>
> Tél : 00226 61 85 77 07
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 

James V Dirkes II, CEO / President
The Building Performance Team Inc.
1631 Acacia Dr, Grand Rapids, MI 49504

(alphabet soup of efforts for greater understanding: PE, BEMP, BCxP, LEED
AP)

Direct / Mobile: 616.450.8653
jim at buildingperformanceteam.com

Website <http://buildingperformanceteam.com>l  LinkedIn
<https://www.linkedin.com/pub/jim-dirkes/7/444/413>

*Coffee conversation:
*Comparison is the thief of joy.

The only person you want to be better than is yourself yesterday.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20180522/e445b171/attachment-0002.html>