[Bldg-sim] Bldg-sim Digest, Vol 123, Issue 18

sadaf er.sadafalam at gmail.com
Mon Feb 26 05:07:38 PST 2018


I am glad it was helpful . By the way i am not sir :)

On Mon, Feb 26, 2018 at 1:04 PM, Jones, Christopher <
Christopher.r.Jones at wsp.com> wrote:


Thank you Sir! Much appreciated. The paper is very interesting. I plan to
> try using it with DOE2.2.
>
>
>
>
>
> *Christopher R. Jones*, P.Eng.
>
> Technical Specialist
>
> Sustainability & Energy
>
>
>
> T +1 416-644-0252 <(416)%20644-0252>
>
>
>
> 2300 Yonge Street, Suite 2300
> <https://maps.google.com/?q=2300+Yonge+Street,+Suite+2300%0D+Toronto,+ON+M4P+1E4+Canada&entry=gmail&source=g>
>
> Toronto, ON M4P 1E4 Canada
> <https://maps.google.com/?q=2300+Yonge+Street,+Suite+2300%0D+Toronto,+ON+M4P+1E4+Canada&entry=gmail&source=g>
>
> wsp.com
>
>
>
>
>
> *Please consider the environment before printing...*
>
>
>
>
>
> *From:* Bldg-sim [mailto:bldg-sim-bounces at lists.onebuilding.org] *On
> Behalf Of *sadaf via Bldg-sim
> *Sent:* Monday, February 26, 2018 6:38 AM
> *To:* bldg-sim at lists.onebuilding.org
> *Subject:* Re: [Bldg-sim] Bldg-sim Digest, Vol 123, Issue 18
>
>
>
> Hi   Christopher,
>
>
>
> Hope you would be doing well. With regards to your query about the
> geometry in IDA ICE, Its not great like E-quest or sketch up or any 3D-
> visualization in the software. However it has its capabilities in modeling
> Controls or Demand response in the buildings. MOBO is the new tool for
> multi- objective building performance , This
> <http://www.ibpsa.org/proceedings/BS2013/p_1489.pdf> is one very good
> article on the same which is from Aalto university.
>
>
>
> It depends for what purpose you want to use the available tools in the
> market.  Other tools are free open source, and more user friendly if you
> compare with IDA ICE. I have used IDA ICE long back in 2013 so i am sure
> there have been some developments in that software.
>
>
>
> I hope this piece of information is useful to you.
>
>
>
>
>
>
>
>
>
> On Sat, Feb 24, 2018 at 9:15 PM, <bldg-sim-request at lists.onebuilding.org>
> wrote:
>
> Send Bldg-sim mailing list submissions to
>         bldg-sim at lists.onebuilding.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> or, via email, send a message with subject or body 'help' to
>         bldg-sim-request at lists.onebuilding.org
>
> You can reach the person managing the list at
>         bldg-sim-owner at lists.onebuilding.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Bldg-sim digest..."
>
> Today's Topics:
>
>    1. Re: IDA ICE experience (Javed Iqbal)
>    2. Issue (KSEPL Energy Efficiency)
>    3. ArchPLUS for Windows OS (Ilker Karadag)
>
>
> ---------- Forwarded message ----------
> From: Javed Iqbal <javedvit at gmail.com>
> To: "Jones, Christopher" <Christopher.r.Jones at wsp.com>
> Cc: "bldg-sim at lists.onebuilding.org" <bldg-sim at lists.onebuilding.org>
> Bcc:
> Date: Sat, 24 Feb 2018 12:17:42 +0530
> Subject: Re: [Bldg-sim] IDA ICE experience
>
> I meant process of creating complex geometry is time consuming! I am aware
> of new release that brings better geometry modeling capabilities which i am
> yet to explore.
>
>
>
> Also, I forgot to mention its parametric capabilities using MOBO
> <http://ibpsa-nordic.org/tools.html> , [Link
> <https://www.youtube.com/watch?v=X5LFKxRPoKQ>] Which we have used in
> facade optimization exercise in some research projects.
>
>
>
> Hope this helps!!
>
>
>
> On Sat, Feb 24, 2018 at 1:59 AM, Jones, Christopher <
> Christopher.r.Jones at wsp.com> wrote:
>
> Thank you Javed,
>
> I am interested in what you say about modeling the geometry. I am a big
> fan of SketchUp for doing the geometry – works for Sefaira, OpenStudio and
> IES VE. Are you indicating that IDA ICE has a more cumbersome geometry
> modeling interface?
>
>
>
>
>
> *Christopher R. Jones*, P.Eng.
>
> Technical Specialist
>
> Sustainability & Energy
>
>
>
> T +1 416-644-0252 <(416)%20644-0252>
>
>
>
> 2300 Yonge Street, Suite 2300
> <https://maps.google.com/?q=2300+Yonge+Street,+Suite+2300%0D+Toronto,+ON+M4P+1E4+Canada&entry=gmail&source=g>
>
> Toronto, ON M4P 1E4 Canada
> <https://maps.google.com/?q=2300+Yonge+Street,+Suite+2300%0D+Toronto,+ON+M4P+1E4+Canada&entry=gmail&source=g>
>
> wsp.com
>
>
>
>
>
> *Please consider the environment before printing...*
>
>
>
>
>
> *From:* Javed Iqbal [mailto:javedvit at gmail.com]
> *Sent:* Friday, February 23, 2018 1:16 PM
> *To:* Jones, Christopher <Christopher.r.Jones at wsp.com>
> *Cc:* bldg-sim at lists.onebuilding.org
> *Subject:* Re: [Bldg-sim] IDA ICE experience
>
>
>
> Hello,
>
>
>
> I have used IDA ICE sometime ago. The main advantage of IDA ICE over other
> simulation programs is implementing control sequences which is pretty
> powerful. I believe, It gives greater flexibility in modeling and
> implementing controls for passive strategies such as natural ventilation,
> double facade compared etc. 3D modeling is heck, however, due to very
> particular about own geometrical interface unlike E+ which gives various
> means to import stable geometry.
>
>
>
> This is my perception, developed while used it for short time and might
> vary compared to someone who is expert user of IDA ICE.
>
>
>
> Hope this helps!!
>
>
>
>
>
>
>
> On Fri, Feb 23, 2018 at 6:54 PM, Jones, Christopher via Bldg-sim <
> bldg-sim at lists.onebuilding.org> wrote:
>
> I am wondering about experience with IDA ICE. Some are claiming it is the
> greatest thing since sliced bread. The blurb on their website sounds
> encouraging but I am always nervous when the cost of software isn’t readily
> apparent.
>
>
>
> We are using eQuest, IES VE and OpenStudio. Are there things IDA ICE can
> to that these other tools cannot? If IDA ICE has good ice rink capabilities
> then it might be worth investigating.
>
>
>
>
>
> *Christopher R. Jones*, P.Eng.
>
> Technical Specialist
>
> Sustainability & Energy
>
>
>
> T +1 416-644-0252 <(416)%20644-0252>
>
>
>
> 2300 Yonge Street, Suite 2300
> <https://maps.google.com/?q=2300+Yonge+Street,+Suite+2300%0D+Toronto,+ON+M4P+1E4+Canada&entry=gmail&source=g>
>
> Toronto, ON M4P 1E4 Canada
> <https://maps.google.com/?q=2300+Yonge+Street,+Suite+2300%0D+Toronto,+ON+M4P+1E4+Canada&entry=gmail&source=g>
>
> wsp.com
>
>
>
>
>
> *Please consider the environment before printing...*
>
>
>
>
>
>
> ------------------------------
>
>
>
> NOTICE: This communication and any attachments ("this message") may
> contain information which is privileged, confidential, proprietary or
> otherwise subject to restricted disclosure under applicable law. This
> message is for the sole use of the intended recipient(s). Any unauthorized
> use, disclosure, viewing, copying, alteration, dissemination or
> distribution of, or reliance on, this message is strictly prohibited. If
> you have received this message in error, or you are not an authorized or
> intended recipient, please notify the sender immediately by replying to
> this message, delete this message and all copies from your e-mail system
> and destroy any printed copies. You are receiving this communication
> because you are listed as a current WSP contact. Should you have any
> questions regarding WSP's electronic communications policy, please consult
> our Anti-Spam Commitment at www.wsp.com/casl. For any concern or if you
> believe you should not be receiving this message, please forward this
> message to caslcompliance at wsp.com so that we can promptly address your
> request. Note that not all messages sent by WSP qualify as commercial
> electronic messages.
>
> AVIS : Ce message, incluant tout fichier l'accompagnant (« le message »),
> peut contenir des renseignements ou de l'information privilégiés,
> confidentiels, propriétaires ou à divulgation restreinte en vertu de la
> loi. Ce message est destiné à l'usage exclusif du/des destinataire(s)
> voulu(s). Toute utilisation non permise, divulgation, lecture,
> reproduction, modification, diffusion ou distribution est interdite. Si
> vous avez reçu ce message par erreur, ou que vous n'êtes pas un
> destinataire autorisé ou voulu, veuillez en aviser l'expéditeur
> immédiatement et détruire le message et toute copie électronique ou
> imprimée. Vous recevez cette communication car vous faites partie des
> contacts de WSP. Si vous avez des questions concernant la politique de
> communications électroniques de WSP, veuillez consulter notre Engagement
> anti-pourriel au www.wsp.com/lcap. Pour toute question ou si vous croyez
> que vous ne devriez pas recevoir ce message, prière de le transférer au
> conformitelcap at wsp.com afin que nous puissions rapidement traiter votre
> demande. Notez que ce ne sont pas tous les messages transmis par WSP qui
> constituent des messages electroniques commerciaux.
>
>
>
> -LAEmHhHzdJzBlTWfa4Hgs7pbKl
>
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
>
>
>
> --
>
>
>
> Javed Iqbal, LEED AP, CEA
> Sr. Energy Analyst
>
>
>
>
>
>
>
>
>
> --
>
>
>
> Javed Iqbal, LEED AP, CEA
> Sr. Energy Analyst
>
>
>
>
>
>
>
> ---------- Forwarded message ----------
> From: KSEPL Energy Efficiency <cxa.ee.expert at kalpakrit.com>
> To: bldg-sim at lists.onebuilding.org
> Cc:
> Bcc:
> Date: Sat, 24 Feb 2018 17:38:34 +0530
> Subject: [Bldg-sim] Issue
>
> Hello everyone,
>
> I am working on a project of Higher secondary School using eQUEST. I have
> modeled VAV with Reheat system as per ASHRAE 90.1 (Appendix G), the
> cooling capacity is kept restore default as per ASHRAE 90.1. The *total
> energy consumption* is right, unmet hour is also less than 300 hours but
> the* cooling capacity* is around 200 times.  Does anyone know how to fix
> this issue?
>
> *Your* advice or suggestions *will* be much *appreciated* and welcomed
>
>
>
>
> --
>
> Thanks & Regards
> Vineet Sharma
>
> *Energy Engineer*
>
>
>
> Kalpakrit Sustainable Enviroments Pvt. Ltd.
> Location: N 28.53'; E 77.22 |72 Khirkee Village, Malviya Nagar, New Delhi
> 110017, India
> T: +91-(0)11-2954 5120 <+91%2011%202954%205120> |  M : +91 9811915120
> <+91%2098119%2015120>
> E:  cxa.ee.expert[at]kalpakrit[dot]com <cxa.ee.expert at kalpakrit.com>
>
>
>
> ---------- Forwarded message ----------
> From: Ilker Karadag <ilkerkaradag at mail.com>
> To: bldg-sim at lists.onebuilding.org
> Cc:
> Bcc:
> Date: Sat, 24 Feb 2018 15:28:55 +0300
> Subject: [Bldg-sim] ArchPLUS for Windows OS
>
> I would like to inform you that ArchPLUS is now available for desktop use
> (a unique software for 3D modelling, importing geometries directly from the
> CAD software and wind-building interaction analyses in real-time!).   You
> may try the desktop version for Windows OS from: *https://lnkd.in/efWJj6E*
> <https://lnkd.in/efWJj6E> (for IOS: *https://lnkd.in/ePz_4vR*
> <https://lnkd.in/ePz_4vR> ) (for Android: *https://lnkd.in/e-xJ84F*
> <https://lnkd.in/e-xJ84F> ) The features of the ArchPLUS v8 can be seen
> from the introduction video (now version 9.3 is available with more
> features and improved wind analysis algorithm): (
> *https://lnkd.in/eZ577Q2* <https://lnkd.in/eZ577Q2> )
>
>
>
>
>
> *İlker Karadağ*
>
> karadagi at itu.edu.tr
>
> *ISTANBUL TECHNICAL UNIVERSITY*
>
> Istanbul Technical UniversityFaculty Of ArchitectureTaskisla 34437 Taksim
> Istanbul/TURKEY
>
> P.
>
> 0212 293 1300 <(0212)%20293%2013%2000> (Intercom: 2313)
>
>
>
>
> _______________________________________________
> Bldg-sim mailing list
> Bldg-sim at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>
>
>
>
>
> --
>
> Thanks & Regards,
>
>  Ms. Sadaf Alam
>
>
>
>
>
>
>
>
>
>
>
> *P** Please consider your environmental responsibility - think before you
> print!l*
>



-- 
Thanks & Regards,

 Ms. Sadaf Alam





*P Please consider your environmental responsibility - think before you
print!l*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20180226/0311a52e/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 25844 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20180226/0311a52e/attachment.png>


More information about the Bldg-sim mailing list