[Bldg-sim] Modeling transpired solar collectors

[Duggin, Cory]

I have used retscreen before for model the solarwall product, but IES just added a transpired solar collector performance component based on the Colorcoat Renew product.  You could modify the performance for whatever brand you wanted though.

Cory Duggin, PE, LEED AP BD+C
Associate/Energy Modeling Wizard, j.g.
TLC Engineering for Architecture
direct:

615-346-1939



From: Bldg-sim [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Sami, Vikram
Sent: Thursday, November 12, 2015 4:47 PM
To: bldg-sim at onebuilding.org
Subject: [Bldg-sim] Modeling transpired solar collectors

We are working on a project with transpired solar collectors. I'm looking for a good tool that will help us estimate the savings from these, but will also give us the ability to test different design options for this.

Any ideas?

Thanks in advance.

Vikram Sami
AIA, BEMP, LEED BD+C
Associate Partner



ZGF ARCHITECTS LLP
T 206.521.3509 E vikram.sami at zgf.com<mailto:vikram.sami at zgf.com>
925 Fourth Avenue, Suite 2400
Seattle, WA 98104


ZGF Email Disclaimer<https://www.zgf.com/ZGF_Email_Disclaimer.html>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20151112/6e28c753/attachment-0001.html>