[Bldg-sim] Miscellaneous Loads in eQuest

[John Aulbach]

OK - from a local LA boy, but a Fighting Illini..

Go back into the Detailed Edit Mode and see what loads are displayed as Miscellaneous. Check the Utilities tab and see if there are ant outdoor or dirct electric loads that are displayed as miscellaneous.

You could always send the .INP and .PD2 files for us to look at.




________________________________
From: Murray Milne <milne at ucla.edu>
To: bldg-sim at lists.onebuilding.org
Sent: Tue, March 2, 2010 6:27:42 PM
Subject: [Bldg-sim] Miscellaneous Loads in eQuest


In eQuest, our graph shows huge miscellaneous loads, but when we try to lower it no change happened. We made miscellaneous loads ZERO and the graph did not change. Does anyone have a clue what we are doing wrong???

Murray Milne, UCLA,  Department of Architecture and Urban Design,

_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100302/02089198/attachment.htm>