[Bldg-sim] custom weather file

[Cheney]

Hi James,

I usually use Ecotect Weather tool to do what you mentioned
here. Alternatively, TAS can edit weather data directly in its module. My
experience is that try not to convert weather file into excel and compile
back since errors may occur easily in the process.

Regards,

Cheney

LinkedIN @ http://ca.linkedin.com/pub/yu-cheney-chen/27/637/72b



On Fri, Dec 10, 2010 at 2:58 PM, James Hansen <JHANSEN at ghtltd.com> wrote:

>  I feel like I’ve seen this question asked before, but couldn’t find it in
> the archives.
>
>
>
> Does anyone know if there is a tool that can extract a TMY file (or EPW
> file) to excel, then allow adjustments to the excel spreadsheet, and can
> then recompile back to TMY or EPW or BIN?
>
>
>
> I basically need to make a custom weather file based on a weather station.
>
>
>
> Thanks, and sorry if this question has already been asked!
>
>
>
> *GHT Limited
> **James Hansen**, PE, LEED AP*
>
> *Senior Associate***
>
> 1010 N. Glebe Rd, Suite 200
>
> Arlington, VA  22201-4749
>
> 703-338-5754 (Cell)
>
> 703-243-1200 (Office)
>
> 703-276-1376 (Fax)
>
> www.ghtltd.com
>
> * *
>
>
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20101210/1db610fa/attachment.htm>