[Bldg-sim] Modeling fume hood exhausts

[Peter Simmonds]

Can anyone tell me when modeling a lab system with fume hoods as to
whether the baseline systems are to be modeled as constant volume?

(subsequent alternatives will have variable volume fume hoods).

 

Peter Simmonds,Ph.D.
Senior Associate

IBE Consulting Engineers
14130 Riverside Drive, Suite 201
Sherman Oaks, CA 91423 
p: (818) 377-8220 x246 f: (818) 377-8230

www.ibece.com <http://www.ibece.com/> 
Ideas for the built environment

This e-mail message, including any attachments, is for the sole use of
the intended recipient(s) and may contain confidential and privileged
information. Any unauthorized review, use, disclosure, or distribution
is prohibited. If you are not the intended recipient, please contact the
sender by reply e-mail and destroy all copies of the original message.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100831/5323e207/attachment.htm>