[Bldg-sim] NEW to equest

[Maudud Quazi]

As for limitations, there are some limitations when it comes to the
Mechanical System design.  Though eQuest has a number of different
mechanical systes, it does not take all designs, one example being using
boiler connected to geothermal supply line for reheat.  I tried it before
and did not work. If anyone worked something out, please let me know.
Thanks

Hassan

On Thu, Aug 26, 2010 at 10:40 AM, varun kulkarni <seldomvarun at gmail.com>wrote:

> Hello Everyone,
>
> I am new to eQuest and trying to model a hospital building which is 10
> floors and total of 600,000 sq ft area.
> Before starting I was trying to see if capacity-wise, does eQuest has any
> limitations of energy modeling.
> Please let me know if anyone has tried doing this before.
>
> --
>
> Thanks and Best Regards,
>
>
>
> Sincerely,
>
> Varun Kulkarni , M.S. , EIT
>
> RMF Engineering
>
> 5520, Research Park Drive, Suite 300
>
> Baltimore, MD - 21228
>
>
>
> Office : 410-576-0505 ext. 5352
>
> Mobile: (+1)405-385-1928
>
>
>
> Note: Please do not print, unless required.
>
>
>
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100826/33a7bb37/attachment.htm>