[Bldg-sim] ASHRAE 1999 Process Loads

[Sami, Vikram]

Yes.
You have to include it in the model (for thermal loading) and subtract it in the final calculations as an unregulated load

Vikram Sami, LEED AP
Sustainable Design Analyst
1382 Peachtree St. NE, Atlanta, GA 30309
t: 404-443-7462    f: 404.892.5823       e: vikram.sami at perkinswill.com   www.perkinswill.com<http://www.perkinswill.com/>
Perkins+Will.  Ideas + buildings that honor the broader goals of society


From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Chris
Sent: Wednesday, August 25, 2010 12:19 PM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] ASHRAE 1999 Process Loads

Does a LEED model based on ASHRAE 1999 need to include process loads, specifically kitchen loads.

--
Chris Flood BSc (Eng)
Senior Building Analyst & Energy Modeller

This email and any files transmitted with it are confidential and intended solely for the addressee. If you are not the named addressee you should not disseminate, distribute, copy, or alter this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100825/39b8b445/attachment.htm>