[Bldg-sim] capturing waste heat
Chris Jones
cj at enersave.ca
Sat Aug 21 08:20:30 PDT 2010
Cross posting not necessary.
What unique method is being used to capture this heat? What type of
appliances, equipment?
The heat from plug loads is "captured" via heat absorbed by the
return air stream, this is mixed at the air handler and moved around
the building. For fan coils, heat pumps, etc, heat is one zone is
moved to other zones via the fluid transfer. This mechanism helps
offset the boiler load.
Is there something else you had in mind?
At 03:37 PM 20/08/2010, Harakhlaal wrote:
>hi everyone
>
>wondering if anyone has an example of an excep. calc for capturing
>waste heat from appliances, equipment and using to offset some boiler
>load ...
>
>thanks!
>
>harakhlaal
>_______________________________________________
>Bldg-sim mailing list
>http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>To unsubscribe from this mailing list send a blank message to
>BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
Chris Jones
14 Oneida Avenue
Toronto, ON M5J 2E3.
Tel. 416-203-7465
Fax. 416-946-1005
More information about the Bldg-sim
mailing list