[Bldg-sim] LEED Process Energy Reduction

Jeremy Poling jpoling at epsteinglobal.com
Thu Aug 5 14:12:38 PDT 2010


We have documented this on two projects - in both cases we had to
document what the industry standard for the process would be and then
how ours was more efficient.  One was related to conveyor energy usage
and the process integrator documented the expected savings based on
numerous other installations they had done over the past few years.  The
second one was the process energy associated with refrigeration -
through team member networking we surveyed approximately 200 owners of
buildings of a similar scope and use to document the baseline
refrigeration system that a building of that type would use.  Then we
documented how our system was different and more efficient.

 

In both cases this was approached with the alternative calculation
methodology of ASHRAE 90.1 and that section of the LEED template.  Hope
that helps!

 

JEREMY R. POLING, PE, LEED AP
Associate Vice President,

Senior Sustainability Analyst
Strategic Services
Site Solutions | Operations | Sustainability

EPSTEIN

Epstein is a firm believer in sustainability. We ask that you please
consider the environment before printing this e-mail.

 

From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Seth P.
Spangler
Sent: Thursday, August 05, 2010 4:04 PM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] LEED Process Energy Reduction

 

Hello All,

 

I am currently working on several process intensive buildings. The
mechanical systems and corresponding control strategies that are being
designed are ideal for achieving 30%-40% savings in a standard office
building but I'm afraid that the common denominator, the high process
loads, will significantly reduce my projects savings. Has anyone
successfully submitted for a reduction in process load. If so, what/how
did you document the reduction?

 

Thanks for your time.

 

Seth Spangler, LEED(r) AP 

 

RMF Engineering, Inc 

Ph: (843) 971-9639 ext:1497

Fax: (843) 971-9641 

sspangle at rmf.com

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100805/107826ff/attachment.htm>


More information about the Bldg-sim mailing list