[Bldg-sim] Old SHGC
Erin Rowe
Erowe at peci.org
Tue Oct 20 17:15:56 PDT 2009
Hi All,
I've been looking through a model in EnergyPro that has a SHGCc of 0.99
entered into the baseline model, because the existing office baseline
building is old single-pane 1/8" glazing (window:wall ratio is about
30%). However, a more reasonable assumption here, based on the
non-residential Oregon code compliance manual would be SHGCc =0.86. The
issue I'm having is that I can't re-run the model so I have no way of
telling how this might impact energy use. My hunch is that this
difference in SHGC would have mimimal affect on the energy consumption.
Any thoughts?
I've also been told that while the EnergyPro input for glazing
characteristics is SHGC, EnergyPro actually treats this input as a
Shading Coefficient in the calculations. So, if this is the case then
an input of 0.99 shading coefficient would actually calculate to be a
SHGC of 0.86, and would be the correct input. Does anyone know if this
is true?
I'd appreciate any feedback you have.
Thanks,
Erin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20091020/4338ec07/attachment-0001.htm>
More information about the Bldg-sim
mailing list