[Bldg-sim] Vertical butt joint glazing - thermal bridging

[Chris Jones]

A client has a project with the glazing units butt jointed at the 
vertical joints between sections.  He thinks that this may have less 
thermal bridging then for a vertical joint with typical framing 
details.  Does any one have any experience with this type of 
joint?  The glazing units are double pane sealed units with warm edge 
spacers.



Chris Jones, P.Eng.
14 Oneida Avenue
Toronto, ON M5J2E3
Tel. 416 203-7465
Fax. 416 946-1005