[Bldg-sim] eQuest 3D model is missing

[Steve Mignogna]

Before you try to re-open the model try this first:

1) "Reset Camera"
2) Change from the Building Shell tab to any of the other tabs and then
click back into the Building Shell tab.
3) "Reset Camera" again.

That usually fixes it.


-- 
Steve Mignogna
Atelier Ten


On Jan 29, 2008 4:03 PM, Bishop, Bill <bbishop at pathfinderengineers.com>
wrote:

>  When you lose the 3D view, save the model, then reopen it.  You may have
> to right click on the screen and select "Reset camera".
>
>
>
> Regards,
>
>
>
> *William Bishop**, EIT, LEED(R) AP** **|** **Pathfinder Engineers LLP*
>
> Mechanical Engineer
>
>
> 3300 Monroe Ave., Suite 306
> Rochester, NY  14618**
>
> TEL (585) 218-0730 Ext. 114
> FAX (585) 218-0737
>
> bbishop at pathfinderengineers.com
>
>
>
> www.pathfinderengineers.com
>
> P Please consider the environment before printing this email
>   ------------------------------
>
> *From:* bldg-sim-bounces at lists.onebuilding.org [mailto:
> bldg-sim-bounces at lists.onebuilding.org] *On Behalf Of *McCready, Jessica
> *Sent:* Tuesday, January 29, 2008 3:53 PM
> *To:* bldg-sim at lists.onebuilding.org
> *Subject:* [Bldg-sim] eQuest 3D model is missing
>
>
>
>
>
> Hello all,
>
> I'm working on a simple model in schematic design, just changed the %
> glazing and lost my ability to view the building in 3D mode. Any
> suggestions?
>
>
>
> Jessica E. McCready
> Energy Engineer
> KEMA Services Inc.
> 492 Ninth Street, Suite 220
> Oakland, CA 94607
> T 510-891-0446
> F 510-891-0440
> jessica.mccready at kema.com
> Please visit our website www.kema.com
>
> _______________________________________________
> Bldg-sim mailing list
> Bldg-sim at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080129/2ca4a2a5/attachment.htm>