[Bldg-sim] user library

[Leadbetter, Keith]

Karen,

 

Try pasting the schedule into the eQ_Lib.dat file. The usrlib.dat file
is for use with stand-alone DOE-2.2.

 

Keith Leadbetter, PE LEED AP* | Pathfinder Engineers LLP 
Senior Mechanical Engineer
3300 Monroe Avenue
Suite 306
Rochester, NY 14618
TEL (585)218-0730, Ext. 110
FAX (585)218-0737
kleadbetter at pathfinderengineers.com
<mailto:kleadbetter at pathfinderengineers.com>  
http://www.pathfinderengineers.com <http://www.pathfinderengineers.com/>


P Please consider the environment before printing this email 

________________________________

From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Karen
Walkerman
Sent: Monday, January 28, 2008 11:40 AM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] user library

 

Hi All,

I'm trying to input some specialty schedules into the user library.  I
created the schedules in a previous project and would like to copy them
to the library.  I copied the following schedule from bdllib.dat, and
just appended "1" to the names to differentiate between the userlib.dat
schedule and bdllib.dat schedule.  The category "Occupancy Schd1" is
showing up, but without any items to choose from.  Any suggestions are
appreciated.

Thanks,

~Karen~


$ ============================================================ SCHEDULES
=======
$=======================================================================
=====
$LIBRARY-ENTRY APT OCC WD1                     DAY-SCHEDULE-PD Occupancy
Schd1
$Apartment Building Occupancy

$Weekdays

 TYPE=FRACTION

$Hr Ending:  1    2    3    4    5    6    7    8    9   10   11   12

 VALUES= (0.95   &D   &D   &D   &D   &D   &D 0.80   &D 0.65   &D   &D

            &D   &D   &D   &D 0.80   &D 0.85   &D   &D 0.95   &D   &D)
.. 
$LIBRARY-ENTRY APT OCC SAT1                    DAY-SCHEDULE-PD Occupancy
Schd1
$Apartment Building Occupancy

$Saturdays

 TYPE=FRACTION

 VALUES= (0.90   &D   &D   &D   &D   &D   &D   &D 0.80   &D 0.70   &D

            &D   &D   &D   &D   &D 0.80 0.90   &D   &D   &D   &D   &D)
..  
$LIBRARY-ENTRY APT OCC WEH1                    DAY-SCHEDULE-PD Occupancy
Schd1
$Apartment Building Occupancy

$Weekends and Holidays

 TYPE=FRACTION

 VALUES= (0.90   &D   &D   &D   &D   &D   &D   &D 0.80   &D 0.70   &D

            &D   &D   &D   &D   &D 0.80 0.90   &D   &D   &D   &D   &D)
..   
$Hr Ending: 13   14   15   16   17   18   19   20   21   22   23   24

$LIBRARY-ENTRY APT OCC WK1                     WEEK-SCHEDULE-PDOccupancy
Schd1
$Apartment Building Occupancy

$Week Schedule

 TYPE=FRACTION

   DAY-SCHEDULES    =

   ( "APT OCC WD", "APT OCC WD"

     "APT OCC WD", "APT OCC WD"

     "APT OCC WD", "APT OCC SAT"

     "APT OCC WEH", "APT OCC WEH"

     "APT OCC WD", "APT OCC WD")  ..

$LIBRARY-ENTRY APARTMENTS OCC1                 SCHEDULE-PD     Occupancy
Schd1
$Apartment Building Occupancy

$Schedule

 TYPE=FRACTION  GROUP=ZONE-LOADS

   WEEK-SCHEDULES = ("APT OCC WK")  MONTH=(12) DAY=(31)  ..

$=======================================================================
=====

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080128/63a480da/attachment.htm>