[Bldg-sim] PSZ HP reheat energy in eQUEST
Derek Whitehead
Derek.Whitehead at rwdi.com
Mon Jan 14 16:22:24 PST 2008
Hello,
I have modelled a PSZ HP system in eQUEST to satisfy a single zone and
have set the maximum humidity to 50%. The DOE2 help file for this system
type says that the PSZ can be used for humidity control of the control
zone because the location of the condenser coil is downstream of the
cooling coil. This suggests to me that reheat should come with no
additional compressor energy requirement. However, the hourly outputs I
have generated show that additional compressor energy is required. Can
anyone explain why?
Thanks
Derek
______________________________________________________________
Celebrating Excellence Since 1972. For more information, please visit www.rwdi.com/35th_anniversary/.
Reputation Resources Results
http://www.rwdi.com
______________________________________________________________
This communication is intended for the sole use of the party to whom it is addressed and may contain information that is privileged and/or confidential. Any other distribution, copying or disclosure is strictly prohibited. If you have received this e-mail in error, please notify us immediately by telephone and delete the message without retaining any hard or electronic copies of same.
RWDI scans outgoing emails for viruses, but makes no warranty as to their absence in this email or attachments.
More information about the Bldg-sim
mailing list