[Bldg-sim] Expert Opinion on Energ. Bldg Simulation in Urban Context

Wed Jan 9 18:13:25 PST 2008

I believe eQuest has inputs for radiant reflectance off of ground
surfaces, but am unsure how "building to building' would be handled.

Not sure the present equate between Euros and USD..

________________________________

From: akram rosheidat [mailto:rosheidat at yahoo.com] 
Sent: Wednesday, January 09, 2008 5:46 PM
To: Aulbach, John; fazia.alitoudert at daad-alumni.de;
bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] Expert Opinion on Energ. Bldg Simulation in
Urban Context

I agree with John, eQuest can be used to simulate an urban scenario
using the Design Development Wizard and the Detailed mode. I am not
aware of any single software that is geared specifically for an "urban:"
scenario testing. However, eQuest allows you to create multiple
buildings on a site, and the "fixed shades" feature allows you to create
shading shapes on the building exterior simulating street and landscape
objects that interact with the building. I am not sure however, about
eQuest's handling of radiant exchange between the street materials and
the buildings and between the buildings themselves. I've only used it
for single building analysis. 

Another software that I looked at (only scratching the surface though)
is ECOTECT, which seems to address some of the urban issues that you're
interested in. The advantage is that it is a European software and uses
metric units which is probably more compatible with your research.
However, it is not free (euro 325 for educational purposes euro 80 for
student) whereas eQuest is.

http://www.squ1.com/ecotect/features

Respectfully

Akram Rosheidat, Architect
TRK Architecture & Facilities Management, Inc.
2632 East Thomas Rd. #200
Phoenix - Arizona 85016
Phone (602)331-1800 extension 223
Fax (602)331-3558
Mobile (480)703-3676
www.trkinc.com
<file:///C:/Documents%20and%20Settings/akram/Application%20Data/Microsof
t/Signatures/www.trkinc.com>  

----- Original Message ----
From: "Aulbach, John" <jaulbach at nexant.com>
To: fazia.alitoudert at daad-alumni.de; bldg-sim at lists.onebuilding.org
Sent: Wednesday, January 9, 2008 11:32:29 AM
Subject: Re: [Bldg-sim] Expert Opinion on Energ. Bldg Simulation in
Urban Context

Hi Farzia:

I am sure there are more robust, but more complicated 3-D models to use.
But many of us use eQuest, which is based on DOE-2.2. The 2.2 program is
an advance of the 25+ years of experience used in the US Department of
Energy's supported DOE-2 program. eQuest now gives us a front end to at
least ramp up various levels of intensity. There are three levels of
opportunity:

1) Schematic Design Wizard - Using a basic floor shape, one can do a
cursory building and a few Energy Efficiency Measures (EEMs).

2) Design Development Wizard - Input floor by floor footprint shapes (or
multiple buildings) with the same level of EEM detail as the Schematic
Wizard.

3) Detailed interface - After creating your building (or buildings) in
either of the above Wizards, input anything DOE-2.2 can muster. 

All three levels can generate a 3-D interface.

You will still need to take a training course to acquaint you with the
basic program "theology" and hierarchies. But I believe this will give
you the best "bang for the buck (or Euro) that is presently available.

And this forum wonderful experts can give you assistance 24/7 (or so it
seems).

-----Original Message-----
From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of
fazia.alitoudert at daad-alumni.de
Sent: Wednesday, January 09, 2008 3:29 AM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Expert Opinion on Energ. Bldg Simulation in Urban
Context

Dear Colleagues,

I am just starting with a research dealing with the energy performance
of urban buildings. The focus is put on the urban context, that is how
would be the energy consumption, thermal and comfort conditions of a
building if placed in a dense built area? also which urban and building
describers are the most decisive? Several urban arrangements (plan
density, H/W, etc.) and various building shapes (and
properties:Materials, Use, etc.) will be studied.

I am right now looking for the best tool for performing my simulations,
so preferably a building energy model (with a strong physical basis) but
including a 3D geometry module.
I would be very grateful if I can have some expert opinion on which tool
would be the most appropriate:
1. TRNSYS is a powerful tool but I still do not know whether it can
include any surrounding buildings (or even vertical screens offset from
the main building which would serve to represent those surroudings?) 2.
TAS includes a 3D modeller which allows the design of the whole 3D area
but I have not used it so far so I do not really know its capabilities,
strengthens and weaknesses.
3. Other models...? Please let me know for any proposed tool about its
ease of use vs. complexity. and how much time I need to learn use it.
4. Of course, I welcome every advice, literature references, or any
useful material.
Many Thanks in advance,
Best regards,
Fazia A.

---------------------------------------------
Fazia Ali-Toudert, Arch. Ph.D.
University of Dortmund - Faculty of Building Chair for Environmental
Architecture Baroper Str. 301
D-44227 Dortmund
Phone:  +49 231 755 5426
Fax:    +49 231 755 5423
website: http://www.bauwesen.uni-dortmund.de/ka/
email:  fazia.alitoudert at daad-alumni.de
          fazia.alitoudert at tu-dortmund.de

_______________________________________________
Bldg-sim mailing list
Bldg-sim at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org

_______________________________________________
Bldg-sim mailing list
Bldg-sim at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080109/379ec11f/attachment.htm>