[Bldg-sim] Supply temperature reset in ASHRAE baseline

[Aulbach, John]

Isn't Package VAV a Terminal System? The reheat coil control should on
the ZONE Level, not the SYSTEM level.

I think.. 

-----Original Message-----
From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of
yizhao1 at vt.edu
Sent: Thursday, February 28, 2008 5:00 PM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Supply temperature reset in ASHRAE baseline

Hi -
In the baseline, ASHRAE requires a supply air temperature reset for
system 5, packaged rooftop VAV w/ reheat (G3.1.3.12). In the air side
system level, I can set up a schedule for cool control, but heat control
is in grey.
Does anyone know how to input the reset in the system? Economizer is
inlcuded.

Thanks!

Ying

_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG