[Bldg-sim] Night Setback Temperatures and Unmet Hours

[Steve Tobin]

Hello all,

 

I am working in the detailed edit mode in E-Quest and cannot find where
to define the night setback temperatures.  The wizard mode allows to
define the unoccupied temperature set points but I cannot find that
setting in the detailed edit mode.  

 

The reason I am looking at this is because I am trying to reduce the
number of unmet hours.  I believe the problem to be during the
unoccupied hours because the number on unmet hours did not change if I
dramatically increased the size of the cooling and heating.  I want to
ensure my set points are correct.

Any help would be appreciated.  Thanks,

 

 

 

Steve Tobin

PROJECT ENGINEER

25501 west valley parkway

olathe ks 66061

direct 913 344.0061

fax 913 345.0617

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080226/700cc6eb/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1778 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080226/700cc6eb/attachment.jpeg>