[Bldg-sim] DOE2.2 / SI standards / Compliance Rule Processor

[Brian Fountain]

eQUEST does not currently support SI units -- that teasing box is there 
for future capabilities but it is not currently active.

For the compliance editor and a sample ruleset etc., you would need to 
talk to the eQUEST development team (Jeff, Scott et al).


Xavier Barrera wrote:
>
> Hello – I am a new DOE2.2 user and I am working with a group of 
> engineers based in Europe. I have 2 questions which I cannot resolve 
> from the documentation.
>
> [1] How do I set up the project so I can work with metric units (SI)? 
> The eQUEST interface suggests this should be possible since the pull 
> down menu in “units of measurement” include an option for metric (as 
> shown in the screenshot).
>
> [2] Where can I find the compliance rule processor? I need to 
> incorporate the different European energy code compliance rules, but I 
> cannot find instructions in the document 
> “DOE22Vol5-ComplianceAnalysis.pdf”. Also, I cannot find the program 
> D2RulCmp.exe.
>
> I appreciate in advance any guidance on this.
>
> Kind regards
>
> Xavier Barrera
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Bldg-sim mailing list
> Bldg-sim at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>   
> ------------------------------------------------------------------------
>
> No virus found in this incoming message.
> Checked by AVG Free Edition. 
> Version: 7.5.516 / Virus Database: 269.19.21/1263 - Release Date: 2/6/2008 8:14 PM
>