[BLDG-SIM] Measured part load data for VAV fans

steve moller - SBE steve.moller at sbe.com.au
Mon Aug 27 19:51:38 PDT 2007


In my quest to make my HVAC models more realistic I am looking for some
measured part load data for VAV fans with variable speed drives.  The
theoretical part load curves I have show a rapid fall in fan power as
flowrate decreases. (something like a power of 2.5 curve)
 
A common design in Australia uses a  variable speed drive to maintain a
minimum supply duct static pressure (typically 200 to 300 Pa).  This
puts a floor under the part load curve at low flowrates.
 
The other factor I'm interested in is how the efficiency of the fan,
motor and VSD change with reducing flow-rate.
 
Can anyone point me to published data from real VAV installations?
 
Thanks in advance,
 
Steve Moller
Senior ESD Engineer

sbe 

sustainable built environments 

Melbourne
Level 10, 459 Lt Collins St
Melbourne Victoria 3000
Australia
T:   +61 3 9670 9820
F:   +61 3 9670 9890
E:   steve.moller at sbe.com.au <mailto:steve.moller at sbe.com.au> 
W:  www.sbe.com.au <http://www.sbe.com.au/>  

Sydney
Level 6, 61 Market Street
Sydney NSW 2000
Australia
T:   +61 2 8289 5720
F:   +61 2 9286 3745 

Perth
PO Box 159
Greenwood WA 6024
Australia
T:   +61 8 9342 6237
F:   +61 8 9342 6237

........................................................................
............
The contents of this email and its attachments are confidential and
privileged. Any unauthorised use of the contents is expressly
prohibited. If you receive this email in error, please contact us, then
delete the email. Before opening or using attachments, check them for
viruses and defects. The contents of this email and its attachments may
become scrambled, truncated or altered in transmission. Please notify us
of any anomalies.
........................................................................
............ 

 


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070828/5488b698/attachment.htm>


More information about the Bldg-sim mailing list