[BLDG-SIM] Exterior shades / daylight on floor surface - ECOTECT

Leonard Sciarra leonard_sciarra at gensler.com
Wed Aug 29 08:19:19 PDT 2007


I may be expanding the forum somewhat, but, does anyone have experience
modeling exterior shades / fins to optimize day lighting using Ecotect?

 
I am modeling some exterior shades and it seems that the impact on
internal light levels is not being reflected to the degree I would
expect.  Now I know the algorithm used uses a diffuse sky rather than
direct radiation, but still the effect of the shades does not seem to
reduce the internal light levels.  I ran a check using insolation and
direct radiation so I know the model "sees" the shades, but the daylight
is acting funny.
 
Thanks.
 

Leonard Sciarra, AIA, LEED ap

312.577.6580 (Dir)

G E N S L E R | Architecture & Design Worldwide

30 West Monroe Street

Chicago IL, 60603

312.456.0123

leonard_sciarra at gensler.com 

 


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070829/c543de3d/attachment.htm>


More information about the Bldg-sim mailing list