[bldg-sim] EQuest Question
Vikram Sami
VSami at lasarchitect.com
Fri Aug 4 10:40:21 PDT 2006
The simplest way to do the courtyard thing (through the wizard) is to
model a small gap through one of the sides of the courtyard. What you'll
need to do then is to go in and delete the 2 exterior walls facing the
gap.
It is not possible to change interior wall types to exterior wall types
(that I know of), but you can create an exterior wall in the same
position, and delete the interior wall.
Vikram Sami, LEED AP
Direct Phone 404-253-1466 | Direct Fax 404-253-1366
LORD, AECK & SARGENT ARCHITECTURE
Responsive Design * Technological Expertise * Exceptional Service
www.lordaecksargent.com
________________________________
From: bldg-sim at gard.com [mailto:bldg-sim at gard.com] On Behalf Of Matt
Barker
Sent: Friday, August 04, 2006 12:23 PM
To: bldg-sim at gard.com
Subject: [bldg-sim] EQuest Question
First Question: How would you model a courtyard surrounded by
classrooms and be able to place windows on the courtyard walls?
Second Question: Is it possible to change an interior wall type into an
exterior wall type?
Any help would be appreciated.
Thanks,
Matt
==================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060804/d4671aa5/attachment.htm>
More information about the Bldg-sim
mailing list