[bldg-sim] EQuest
Tupper, Kendra
Kendra.Tupper at sf.fk.com
Mon Aug 7 08:22:09 PDT 2006
Matt,
You can change it manually in the detailed data edit mode, but changing
floor to floor heights, wall heights, etc. If you want to do it in the
wizard, you'd have to create a building shell (and associated footprint)
for each zone height. OR create another building shell on top of the
first footprint that adds the additional height to the necessary zones.
You would make the top zones "Open to Below" in the zone characteristics
box (on the sheet where you define the footprint).
Kendra
Kendra Tupper
LEED(r) AP
FLACK + KURTZ
405 Howard St. San Francisco, CA 94105
Direct (415) 402-5840
Email kendra.tupper at sf.fk.com <mailto:kendra.tupper at sf.fk.com%20>
________________________________
From: bldg-sim at gard.com [mailto:bldg-sim at gard.com] On Behalf Of Matt
Barker
Sent: Monday, August 07, 2006 8:00 AM
To: bldg-sim at gard.com
Subject: [bldg-sim] EQuest
Hello everyone,
Does anybody know if it is possible to assign different heights in
various Zones within the same footprint.
Thanks for any help,
Matt
==================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060807/0971bf02/attachment.htm>
More information about the Bldg-sim
mailing list