[BLDG-SIM] Equest windows
Mitchell Dec
mdec at glumac.com
Tue Aug 8 11:22:20 PDT 2006
Matt, I believe your question asks how to generate the two different glazings on the building (fastest). In order to assign the two windows to different areas of the building, the fastest way is creating the two glazing and applying them through search and replace techniques in the INP file. After this is done, one can make global changes to one glazing or the other through parametric runs or changing the glazing directly in the inputs, as has been mentioned in past responses.
If you use parameters and only have one glazing assigned, all of your windows will change as opposed to only half of your windows.
Mitchell J. Dec
Energy Analyst
<http://www.glumac.com/>
_____
320 SW Washington, Suite 200
Portland, OR 97204-2640
T. 503.227.5280 F. 503.274.7674
Direct: 503.345.6283
Thinking. Inside the building.
http://www.glumac.com/
-----Original Message-----
From: BLDG-SIM at GARD.COM [mailto:BLDG-SIM at GARD.COM]On Behalf Of Vikram Sami
Sent: Tuesday, August 08, 2006 10:48 AM
To: BLDG-SIM at GARD.COM
Subject: [BLDG-SIM] Equest windows
You can use the parametric simulation function to select a whole bunch of windows and change the glass type. You can also set the global parameters if you are using the simplified glass model to vary either SC, VT or Uvalue parametrically. (This is in the detailed interface).
Vikram Sami, LEED AP
Direct Phone 404-253-1466 | Direct Fax 404-253-1366
LORD, AECK & SARGENT ARCHITECTURE
Responsive Design * Technological Expertise * Exceptional Service
www.lordaecksargent.com
_____
From: BLDG-SIM at GARD.COM [mailto:BLDG-SIM at GARD.COM] On Behalf Of Matt Barker
Sent: Tuesday, August 08, 2006 12:57 PM
To: BLDG-SIM at GARD.COM
Subject: [BLDG-SIM] Equest windows
Hello everyone,
Is it possible when working with numerous windows to globally specify half of them one type and the other half another type? Or do you have to do it one window at a time. Thanks for the help.
Matt
==================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
==================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060808/49c8c8c8/attachment.htm>
More information about the Bldg-sim
mailing list