[BLDG-SIM] Using -999 in Min OA Schedule in eQuest
Tupper, Kendra
Kendra.Tupper at sf.fk.com
Thu Aug 17 16:24:08 PDT 2006
I am trying to simulate the following system:
A DX cooler with VAV (HW reheat) that uses 100% outside air and an
indirect/direct evap cooler in the cooling months (the climate is Las
Vegas - very hot and dry). In the winter, the outside air should be at
a minimum as determine by the OA/person specified at the zonal level.
I created a Minimum OA Schedule and set the fraction to 1.0 for the
cooling months. In the help menu, and in the DOE2.2 documentation, it
says to set the schedule value to -999 when you want the fraction to
revert to the minimum calculated OA. When I tried to enter -999, I get
an error saying that negative values are not accepted. I tried changing
this in the input file, but when I open the file in eQuest, I receive
errors as well.
Does anyone know how to get eQuest to accept the -999 value in the
minimum OA schedule?
Thank you!
Kendra
Kendra Tupper
LEED(r) AP
FLACK + KURTZ
405 Howard Street 415.398.3833 Main
Suite 500 415.402.5840 Direct
San Francisco, CA 94105 415.433.5311 Fax
http://www.flackandkurtz.com kendra.tupper at sf.fk.com
This e-mail may contain confidential and/or privileged information.
If you are not the intended recipient (or have received this e-mail in
error)
please notify the sender immediately and destroy this e-mail.
Any unauthorized copying, disclosure or distribution of the material
in this e-mail is strictly forbidden.
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060817/6991f548/attachment.htm>
More information about the Bldg-sim
mailing list