[BLDG-SIM] Radiant floor cooling and increased capacity with thicker slab
Laouadi, Aziz
Abdelaziz.Laouadi at nrc-cnrc.gc.ca
Fri Aug 25 10:37:14 PDT 2006
Ian,
You may consider to use ESP-r computer program to model such a system,
using a two-dimensional heat transfer model that I implemented in ESP-r
some years ago. Here is a link to the paper:
Laouadi, A. "Development of a radiant heating and cooling model for
building energy simulation software," Building and Environment, 39, (4),
April, pp. 421-431, Apr, 2004
(NRCC-46099)
<http://irc.nrc-cnrc.gc.ca/fulltext/nrcc46099/>
Thanks
Dr. Abdelaziz (Aziz) Laouadi
Research Officer
Indoor Environment Research Program
Institute for Research in Construction
National Research Council of Canada
1200 Montreal Road, Building M-24
Ottawa, Ontario, Canada, K1A 0R6
Tel.: (613) 990 6868; Fax: (613) 954 3733
Email: Aziz.Laouadi at nrc-cnrc.gc.ca
Web: http://irc.nrc-cnrc.gc.ca/ie/lighting/daylight/skyvision_e.html
-----Original Message-----
From: BLDG-SIM at GARD.COM [mailto:BLDG-SIM at GARD.COM] On Behalf Of Ian
Doebber
Sent: Friday, August 25, 2006 12:49 PM
To: BLDG-SIM at GARD.COM
Subject: [BLDG-SIM] Radiant floor cooling and increased capacity with
thicker slab
I'm looking into improving the overall efficiency of a radiant cooling
system by increasing the slab thickness 1-2 inches below the tubing and
using night cooling to charge the slab. Currently, we have 5/8" tubing
fastened to a layer of insulation on grade and 4" of concrete poured on
top. Ideally, if we can significantly reduce the need for cooling in
the morning for a few hours and even reduce the peak cooling load at 5pm
during the day, then we will definitely look further into this strategy.
Has anyone modeled this or better yet have experience with this on a
project and seen the benefits?
Thanks
Ian Doebber
Graduate Mechanical Engineer
Arup
901 Market Street Suite 260 San Francisco CA 94103
tel: 415-946-0292
fax: 415-957-9096
cell: 415-613-4314
ian.doebber at arup.com
www.arup.com
____________________________________________________________
Electronic mail messages entering and leaving Arup business systems are
scanned for acceptability of content and viruses
==================
You received this e-mail because you are subscribed to the
BLDG-SIM at GARD.COM mailing list. To unsubscribe from this mailing list
send a blank message to BLDG-SIM-UNSUBSCRIBE at GARD.COM
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
More information about the Bldg-sim
mailing list