[bldg-sim] eQUEST : Setback

[Mahabir Bhandari]

Gerald,

You can accomplish this by modifying your heating/cooling set point
schedule. You can input the setback (or setup) temperatures for the
nighttime hours. You cannot use Wizard mode for this and you will need to
use Detailed Edit mode. I hope it helps.

Mahabir 

Mahabir Bhandari, Ph.D.
Senior Energy Analyst
Carli Inc.
Tel:  (413) 256 4647
Fax: (413) 256 4823

-----Original Message-----
From: postman at gard.com [mailto:postman at gard.com] On Behalf Of Gerald Pde
Sent: Thursday, January 20, 2005 5:29 PM
To: bldg-sim at gard.com
Subject: [bldg-sim] eQUEST : Setback

Hi all,
Can anyone tell me how does DOE-define nighttime
setback. For example, if I have to compare two modes
of operation, with and without nighttime setback, what
is the best way to go about it?
Thanks.
Gerald


		
__________________________________ 
Do you Yahoo!? 
Take Yahoo! Mail with you! Get it on your mobile phone. 
http://mobile.yahoo.com/maildemo 

======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM


======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM