[bldg-sim] 3D model display problem in equest

[Vämshi Goojè]

Gary-
Try this one:
Open ".pd2" file of the project in a text editor (notepad/note tab lite).
Check the coordinates of 'ClippingRange', 'FocalPoint' &
'Position'...If any of these coordinates dont seem alright then modify
to some positive values...save the file and then open the project in
eQUEST.
Vamshi


On Sun, 30 Jan 2005 12:26:01 +0800, Gary Zeng <gzeng at royalservice.com> wrote:
> Dear everyone:
> now,i am working on a simulationn project that has a relatively complex shape, which i have to give some modification by using polygon and tilt in the detailed mode. But everytime when I reopen the project, the 3D model can not be displayed. Do anyone know how to make it possible to display the 3D model. And the PC resources is the majoe reason that cause this problem?
> 
> Your reply will be greatly appreciated.
> 
> 致
> 礼！
> 
> 
> Gary Zeng
> gzeng at royalservice.com
> 2005-01-30
> 


-- 
Vämshi Goojè

===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM