[BLDG-SIM] Multiple air cooled, split type airconditioner

Aulbach, John JAulbach at semprasolutions.com
Wed Oct 2 10:31:23 PDT 2002


Do you have to zone the building so all 42 air cooled units are distinct? Or
can you combine them into, say, 5-8 mega units?
 
Also, make sure you model by facing direction and either a single or two
interior zones.
 
You could also combine mid floors (2-9), if, again, you don't need to be
precise on the 42 units' zoning.
 
John R. Aulbach, PE, CEM
Project Engineer
Sempra Energy Solutions
555 West Fifth Street
Mail Location 27F3
Los Angeles, CA 90013
Tel: (213) 244-8551 Beeper (888) 520-1051
 

"Sempra Energy Solutions is not the same company as SDG&E/ SoCalGas, the
Utilities.  Sempra Energy Solutions is not regulated by the California
Public Utilities Commission, and you do not have to buy Sempra Energy
Solutions products or services to continue to receive quality regulated
service from the Utilities."  

-----Original Message-----
From: Stanley [mailto:stanleyc at sby.dnet.net.id]
Sent: Wednesday, October 02, 2002 10:24 AM
To: BLDG-SIM at GARD.COM
Subject: [BLDG-SIM] Multiple air cooled, split type airconditioner


I am modeling a 10 storey 40*40 sq.m building with large atrium which is
served by multiple (42 units) air cooled, 
split type AC ( AC supplying air through ducts to various spaces) using the
Micro-DOE2.1E
 
Does anyone have any input similiar with this kind of building, so I can
learn furthermore how to model correctly?
 
 
 
Stanley Christian
stanleyc at sby.dnet.net.id <mailto:stanleyc at sby.dnet.net.id> 
Undergraduate student of Civil Engineering
Petra Christian University - Indonesia


=====================================================You received this
e-mail because you are subscribed 

to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 

from this mailing list send a blank message to 

BLDG-SIM-UNSUBSCRIBE at GARD.COM



======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20021002/26f51a8d/attachment.htm>


More information about the Bldg-sim mailing list