[BLDG-SIM] Static Pressure Reset modeling in DOE 2

[babetsk at jbb.com]

To Doe 2 Users:

Hello,

Does anybody know if there is a way to model (in DOE-2) an "optimized static pressure control", that is a control method where the controller dynamically adjusts the static pressure set point based on the position of the modulating devices in the VAV terminal units? 

Thank you


Konstantin E. Babets, Ph.D.
CFD/Energy Modeling Engineer
Jaros Baum and Bolles
Consulting Engineers
80 Pine Street
New York NY 1005
Tel:   212.530.9455
Fax: 212.269.5894




===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20021009/3ea460c1/attachment.htm>