[Bldg-rate] Bldg-rate Digest, Vol 35, Issue 1

[Alex Chapin]

Kevin,

Are you under the impression that 5 packaged rooftop air handlers must be included in the proposed design? If so, then you should be aware that this only applies to the Baseline model. If that's not what you were saying, then I'm not sure why the Architect when need to be told anything earlier in the design. Unless you are implying that your Proposed model would perform better against a system other than System type 5 in which case the Architect could adjust the footprint of the building to affect the Baseline system type if they knew about this requirement.

Alex

-----Original Message-----
From: bldg-rate-bounces at lists.onebuilding.org [mailto:bldg-rate-bounces at lists.onebuilding.org] On Behalf Of bldg-rate-request at lists.onebuilding.org
Sent: Monday, February 27, 2012 4:31 PM
To: bldg-rate at lists.onebuilding.org
Subject: Bldg-rate Digest, Vol 35, Issue 1

Send Bldg-rate mailing list submissions to
	bldg-rate at lists.onebuilding.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.onebuilding.org/listinfo.cgi/bldg-rate-onebuilding.org
or, via email, send a message with subject or body 'help' to
	bldg-rate-request at lists.onebuilding.org

You can reach the person managing the list at
	bldg-rate-owner at lists.onebuilding.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of Bldg-rate digest..."


Today's Topics:

   1. ASHRAE 90.1 G3.1.1 (Kevin Kyte)


----------------------------------------------------------------------

Message: 1
Date: Mon, 27 Feb 2012 11:37:24 -0500
From: Kevin Kyte <KKyte at watts-ae.com>
To: "'bldg-rate at lists.onebuilding.org'"
	<bldg-rate at lists.onebuilding.org>
Subject: [Bldg-rate] ASHRAE 90.1 G3.1.1
Message-ID:
	<7F7FF64673C26D4DA4A62094657BD91411875B81F1 at wattsexch.wattsae.local>
Content-Type: text/plain; charset="us-ascii"

Each floor shall be modeled with a separate HVAC system yet each system (System 5 & 6) shall be packaged?  5 storey buildings less than 150,000 ft2 shall have 5 packaged rooftop air handlers?
If we are trying to change the intuitive design of building structures than someone should tell the Architect what they shall do with the floor space earlier in design.

Kevin J. Kyte, PE, BEMP, LEED (r) GA
Mechanical Engineer
Watts Architecture & Engineering, P.C.
95 Perry Street, Suite 300
Buffalo, NY  14203
p:  716 206 5174
f.:  716 206 5199
e:   kkyte at watts-ae.com<mailto:kkyte at watts-ae.com>
http://www.watts-ae.com<http://www.watts-ae.com/>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-rate-onebuilding.org/attachments/20120227/618f1e46/attachment.html>

------------------------------

_______________________________________________
Bldg-rate mailing list
Bldg-rate at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/bldg-rate-onebuilding.org


End of Bldg-rate Digest, Vol 35, Issue 1
****************************************