[Bldg-rate] District Thermal Energy in LEED

[estuder]

Hello Paul,
Based on my understanding the base case for Step 2 is the same as the base
case for Step 1, which would be a gas-fired, 80% efficient hot water boiler
(or two boilers depending on the size of the facility).  It seems that the
reason Step 2 exists is to see the incremental benefits and penalties
associated with using a central plant.  In your case, you also get to claim
financial benefits or penalties associated with usinig coal as the fuel
source.  Distribution losses are always penalties.
Eric


__________________

Eric Studer, PE
Project Manager
DMI
35 Walnut Street
Wellesley, MA
(781) 431-1100 ext 12
Fax: (781) 431-1109


  	-------Original Message-------
From: Paul Riemer
Subject: [Bldg-rate] District Thermal Energy in LEED
Sent: May 06 '09 01:11


Fellow Modelers,

I would greatly appreciate any answers and comments on formulating a
submission and/or CIR.


I am working on a LEED project which is heated by steam from a coal fired
plant and is subject to the USGBC's District Thermal Energy document [LINK:
https://www.usgbc.org/ShowFile.aspx?DocumentID=4176]
https://www.usgbc.org/ShowFile.aspx?DocumentID=4176.

Should the baseline hot water boiler plant in the Step 2 analysis be:

A) a coal fired boiler with the proposed boiler efficiency since 90.1 does
not address coal fired boilers,

B) a natural draft coal fired hot water boiler with an assumed code
efficiency since 90.1 does not address coal fired boilers,

C) a natural draft gas fired hot water boiler with the code efficiency
referenced in 90.1, or

D) something else?


Remember the metric is energy cost savings.


If you reread it, replacing the word 'coal' with 'trash', does your answer
change?


Thank you,


Paul Riemer

Dunham


          --------------------
  _______________________________________________
Bldg-rate mailing list
[LINK:
http://lists.onebuilding.org/listinfo.cgi/bldg-rate-onebuilding.org]
http://lists.onebuilding.org/listinfo.cgi/bldg-rate-onebuilding.org
To unsubscribe from this mailing list send  a blank message to [LINK:
http://mbox.dmiinc.com/compose.php?to=BLDG-RATE-UNSUBSCRIBE@ONEBUILDING.ORG]
BLDG-RATE-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-rate-onebuilding.org/attachments/20090506/6d4542de/attachment-0013.htm>