[Bldg-rate] Occupany/Vacancy Sensors for Lighting Power

Kevin Kyte kkyte at robsonwoese.com
Thu Apr 30 07:16:50 PDT 2009


Is anyone aware of a CIR or received approval for using vacancy lighting sensors on a LEED project.  Meaning the sensor works like an occupancy sensor but does not turn lights on until the user flips the switch.  Then the lights automatically turn off after sensing no occupancy for a time.  If so, what is the approved percentage deduction off of light power density.  I was assuming an additional 10% over regular occupancy sensors but have been told the savings could really be a lot higher than that.  Thanks.

Kevin

________________________________
"This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or the taking of any action in reliance on the contents of this information is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by e-mail and delete the original message."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-rate-onebuilding.org/attachments/20090430/6844f2e8/attachment-0004.htm>


More information about the Bldg-rate mailing list