[Bldg-rate] [Bldg-sim] District Thermal System

[David S Eldridge]

Sorry, correction to my earlier post -- for Step 2 it should be a virtual DES, regardless of if you have a tariff to use or not.  The virtual plant would be consuming equivalent fuels to produce the DES services.

David


> -----Original Message-----
> From: bldg-rate-bounces at lists.onebuilding.org [mailto:bldg-rate-
> bounces at lists.onebuilding.org] On Behalf Of Paul Riemer
> Sent: Tuesday, September 09, 2008 3:15 PM
> To: bldg-sim at lists.onebuilding.org; bldg-rate at lists.onebuilding.org
> Subject: Re: [Bldg-rate] [Bldg-sim] District Thermal System
>
>
> But as I read Step 2, the proposed model must include analysis of the DES
> plant in such a way as to show the conversion from loads at the building to
> corresponding fuel consumption at the DES plant to corresponding dollars.
> If you could stop at the dollars per load charged to the building, why did
> the anonymous authors provide default efficiencies and losses on page 8.