[Equest-users] changing back to autosize HVAC in detailed mode

[Brian Fountain]

Right-click and then hit "restore default" OR put a 0 in for the heating 
and cooling capacity (allows you to do it as a parametric run -- as I 
have to do on a file this evening).



On 6/29/2011 4:40 PM, deepika khowal wrote:
> Hello
>
> I initially used a specific cooling and heating  capacities in my 
> equest model while in wizard mode.
> now in detailed mode, I want to switch back to autosize to calculate 
> the exact equipment size required for the building.
> Is there a way to do this?
> Thanks
> Regards
> Deepika
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
> No virus found in this message.
> Checked by AVG - www.avg.com <http://www.avg.com>
> Version: 10.0.1388 / Virus Database: 1516/3732 - Release Date: 06/28/11
>




-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1388 / Virus Database: 1516/3733 - Release Date: 06/29/11
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110629/bc150545/attachment.htm>