[Equest-users] Interior walls on exterior

Sachin Sharma sachin5787 at gmail.com
Mon Jun 13 22:32:22 PDT 2011


Hi Brad,

It seems that while zoning you might have not defined the exterior walls
properly. Because of this the white walls are appearing on the exterior
facade. While defining the building footprint, it might be possible that you
didn't snap on to the cad file properly. So, make sure that the exterior
walls of the footprint and the zones vertices should match. Otherwise, the
exterior walls will not show up. The best way to do this is to change
settings to keep CAD file snap as first priority. 

Thanks

Regards,
Sachin
NIT, Jaipur
+91 9983912512

-----Original Message-----
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Brad
Donohue
Sent: 14 June 2011 07:43
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Interior walls on exterior

Hello,

I am working through my first model in equest and I am finding that some
interior walls (the white walls im assuming) are showing up on the exterior
of the building.  I have been told that this should not effect results and
that it is just visually unappealing.  Any advice or comments?

Brad
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG



More information about the Equest-users mailing list