[Equest-users] Floor Multiplier

[Arpan Bakshi]

No. Top has roof condition. Ground has ground contact. All middle floors
have adiabatic top and bottom surfaces.


On Fri, Jun 10, 2011 at 3:19 PM, Brad Donohue <brad.donohue at me.com> wrote:

> Hello,
>
> I have constructed a shell that is 3 floors tall.  Each floor shares the
> same zone characteristics but page 14 of the DD wizard says I need to define
> top, middle and ground.  Can I model one floor and just multiply the floor
> height by 3?
>
> Brad
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110610/da499ceb/attachment.htm>